02-12-2009 01:00 PM - edited 03-15-2019 04:11 PM
I am trying to get a IOS conference bridge setup and can't seem to get it registered. One thing I noticed was when I do a "show sccp" I receive this
SCCP Admin State: DOWN
Gateway IP Address: 10.91.89.21, Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.47.3.13, Port Number: 2000
Priority: N/A, Version: 4.1, Identifier: 1
Call Manager: 10.47.3.12, Port Number: 2000
Priority: N/A, Version: 4.1, Identifier: 2
Call Manager: 10.47.3.11, Port Number: 2000
Priority: N/A, Version: 4.1, Identifier: 3
Here is my gateway config.
sccp local Loopback0
sccp ccm 10.XX.3.13 identifier 1 version 4.1
sccp ccm 10.XX.3.12 identifier 2 version 4.1
sccp ccm 10.XX.3.11 identifier 3 version 4.1
!
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate profile 1 register CAL-CONF
switchback method immediate
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 3
associate application SCCP
Solved! Go to Solution.
02-12-2009 01:27 PM
do a no sccp / sccp, confirm the device name in CUCM
HTH
java
if this helps, please rate
02-12-2009 01:27 PM
do a no sccp / sccp, confirm the device name in CUCM
HTH
java
if this helps, please rate
02-12-2009 01:30 PM
Thanks Java! that was it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide