Enable WLC/AP Public Safety

Answered Question
Feb 12th, 2009
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

In the WLC command of "sh ap config general <AP name>" on the 2nd page of the output, what is "Public Safety" function and how do I enable this?


Thanks for all the assistance.

Correct Answer by Scott Fella about 8 years 4 months ago

This is for public safety in which it can support wireless in the 4.9GHz frequency. This is a licensed frequency and only can be used by organizations who deal in public safety. You can look at this link for the 1520 MESH AP for clarity:


http://cisco.com/en/US/docs/wireless/access_point/1520/quick/guide/ap1520qsg.html#wp45960


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Scott Fella Fri, 02/13/2009 - 04:42
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

This is for public safety in which it can support wireless in the 4.9GHz frequency. This is a licensed frequency and only can be used by organizations who deal in public safety. You can look at this link for the 1520 MESH AP for clarity:


http://cisco.com/en/US/docs/wireless/access_point/1520/quick/guide/ap1520qsg.html#wp45960


Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode