Solved: Enable WLC/AP Public Safety

Leo Laohoo · ‎02-12-2009

In the WLC command of "sh ap config general <AP name>" on the 2nd page of the output, what is "Public Safety" function and how do I enable this?

Thanks for all the assistance.

Scott Fella · ‎02-13-2009

This is for public safety in which it can support wireless in the 4.9GHz frequency. This is a licensed frequency and only can be used by organizations who deal in public safety. You can look at this link for the 1520 MESH AP for clarity:

http://cisco.com/en/US/docs/wireless/access_point/1520/quick/guide/ap1520qsg.html#wp45960

-Scott
*** Please rate helpful posts ***

View solution in original post

Scott Fella · ‎02-13-2009

This is for public safety in which it can support wireless in the 4.9GHz frequency. This is a licensed frequency and only can be used by organizations who deal in public safety. You can look at this link for the 1520 MESH AP for clarity:

http://cisco.com/en/US/docs/wireless/access_point/1520/quick/guide/ap1520qsg.html#wp45960

-Scott
*** Please rate helpful posts ***