802.1x, switch 3550, radius server

Answered Question
Feb 12th, 2009
User Badges:
  • Bronze, 100 points or more

Hi every body!

If i want to configure switch 3550 to use 802.1x with radius server. Are the following steps are correct?

switch(config)# aaa new-model

switch(config)# radius-server host 10.10.10.10 key cisco

switch(config)# aaa authetication dot1x default group radius.

switch(config)#aaa authentication network default group radius

switch(config)# dot1x system-auth-control

switch(config) int f0/1

switch(config-if) dot1x port-control auto


Do we need the command"aaa authentication network default group radius" or not?


thanks a lot!

Correct Answer by Jon Marshall about 8 years 2 months ago

Sarah


"Do we need the command"aaa authentication network default group radius" or not?"


No you don't need it, it is optional if all your are doing is configuring 802.1x. See this link for more details -


http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/sw8021x.html#wp1155289


Jon


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Thu, 02/12/2009 - 20:11
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Sarah


"Do we need the command"aaa authentication network default group radius" or not?"


No you don't need it, it is optional if all your are doing is configuring 802.1x. See this link for more details -


http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/sw8021x.html#wp1155289


Jon


Actions

This Discussion