Solved: 802.1x, switch 3550, radius server

sarahr202 · ‎02-12-2009

Hi every body!

If i want to configure switch 3550 to use 802.1x with radius server. Are the following steps are correct?

switch(config)# aaa new-model

switch(config)# radius-server host 10.10.10.10 key cisco

switch(config)# aaa authetication dot1x default group radius.

switch(config)#aaa authentication network default group radius

switch(config)# dot1x system-auth-control

switch(config) int f0/1

switch(config-if) dot1x port-control auto

Do we need the command"aaa authentication network default group radius" or not?

thanks a lot!

Jon Marshall · ‎02-12-2009

Sarah

"Do we need the command"aaa authentication network default group radius" or not?"

No you don't need it, it is optional if all your are doing is configuring 802.1x. See this link for more details -

Jon

Jon Marshall · ‎02-12-2009

Sarah

"Do we need the command"aaa authentication network default group radius" or not?"

No you don't need it, it is optional if all your are doing is configuring 802.1x. See this link for more details -

Jon