02-12-2009 08:26 PM - edited 03-06-2019 04:01 AM
I have a cisco router 1841 with 2FE, one to the Lan(10.100.100.65/26) and the other to the Internet(192.168.0.2/255)
I want to carry out the listed task
-To configure DHCP on 1841 router -To share internet access using the router - To restrict about 40 systems out of 50 systems from browsing the internet - All system should be able to access mail in the nearest future.
I did the configuration using PAT, DHCP and Accessing-list but all the systems are browsing here are the access list used.
access-list 120 permit tcp host 10.100.100.65 0.0.0.63 192.168.0.2 eq 80
access-list 120 permit tcp host 10.100.100.66 0.0.0.63 192.168.0.2 eq 80
access-list 120 permit tcp host 10.100.100.67 0.0.0.63 192.168.0.2 eq 80
access-list 120 deny tcp any 192.168.0.2 0.0.0.255 eq 80
access-list 120 permit ip any any (To allow other network access)
How do i restrict 40 workstatons from accessing only internet from a block size of 64 ip
02-12-2009 10:08 PM
Errr ... Shouldn't it be like this?
access-list 120 permit tcp host 10.100.100.65 host 192.168.0.2 eq 80
access-list 120 permit tcp host 10.100.100.66 host 192.168.0.2 eq 80
access-list 120 permit tcp host 10.100.100.67 host 192.168.0.2 eq 80
access-list 120 deny tcp any host 192.168.0.2 eq 80
access-list 120 permit ip any any
02-12-2009 10:15 PM
Errr ... Shouldn't it be like this?
access-list 120 permit tcp host 10.100.100.65 host 192.168.0.2 eq 80
access-list 120 permit tcp host 10.100.100.66 host 192.168.0.2 eq 80
access-list 120 permit tcp host 10.100.100.67 host 192.168.0.2 eq 80
access-list 120 deny tcp any host 192.168.0.2 eq 80
access-list 120 permit ip any any
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: