snmp request to ubr7200 series

Unanswered Question
Feb 13th, 2009

hello,

is there an OID which I can use to get a snmp-request from a Cisco ubr7200 Series and get a result like equal to the output of the command in privileged mode "show cable modem summary" ?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Sun, 02/15/2009 - 17:05

I'm not sure what the output of this command looks like, or what version of IOS you're running. However, a ubr7200 running ubr7200-jk9su2-mz.122-33.SCB supports the following cable-related MIBs:

CISCO-CABLE-ADMISSION-CTRL-MIB

CISCO-CABLE-AVAILABILITY-MIB

CISCO-CABLE-METERING-MIB

CISCO-CABLE-QOS-MONITOR-MIB

CISCO-CABLE-SPECTRUM-MIB

CISCO-DOCS-EXT-MIB

CISCO-DOCS-QOS-EXT-MIB

CISCO-DOCS-REMOTE-QUERY-MIB

DOCS-BPI-MIB

DOCS-BPI-PLUS-MIB

DOCS-CABLE-DEVICE-MIB

DOCS-CABLE-DEVICE-TRAP-MIB

DOCS-DRF-MIB

DOCS-DSG-IF-MIB

DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB

DOCS-IF-EXT-MIB

DOCS-IF-MIB

DOCS-IFEXT2-MIB

DOCS-L2VPN-MIB

DOCS-LOADBAL3-MIB

DOCS-LOADBALANCING-MIB

DOCS-QOS-MIB

DOCS-SUBMGT-MIB

DOCS-TEST-MIB

There MIBs can be downloaded from ftp://ftp.cisco.com/pub/mibs/v2/ . Perhaps one or more of them can provide you the data you need.

Actions

This Discussion