I am trying to setup a VG224 to replace the large bank of ATAs I have collected for faxing. When I do a sho ccm I see the VG224 is registered. Looking in UCM 6 I see the individual ports showing Registration Rejected.
Here is the config I am running:
chvg224#sho run | b mgcp
ccm-manager mgcp
ccm-manager config server 10.4.1.10
!
mgcp
mgcp call-agent 10.4.1.10 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface FastEthernet0/0
mgcp bind media source-interface FastEthernet0/0
!
mgcp profile default