02-14-2009 05:59 AM - edited 03-15-2019 04:13 PM
I recently add a remote site. The Gateway is running IOS 12.4.15-T8 and the Callmanager is V5.12. Everthing seems to be working however I notice the Vocie Gateway indicate the Configuration Auto-Download Fail. See below.
Configuration Auto-Download Information
=======================================
No configurations downloaded
Current state: Downloading XML file
Configuration Download statistics:
Download Attempted : 5
Download Successful : 0
Download Failed : 0
TFTP Download Failed : 8857
Configuration Attempted : 0
Configuration Successful : 0
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
I have attached a ccm debug and ccm config.
Any help is appreciated.
Mark
Solved! Go to Solution.
02-17-2009 07:43 PM
02-17-2009 08:50 AM
Hi All,
Anyone has any suggestions?
Thanks.
Mark
02-17-2009 06:53 PM
Hi Mark,
I would do a quick test:
Try downloading this file:
tftp://10.108.15.9/CATOR3RT2851-1.cnf.xml
You can use the tftp client that should be built into windows (maybe not Vista), a 3rd party tftp client, or just the router cli.
If you can download it, it may be a ccm manager config error, or a way the CUCM is writing the file.
If you can't download it, I would try restarting the TFTP service on CUCM.
-nick
02-17-2009 07:40 PM
Hi Nick,
I am able to download the file using tftp client or from a PC's commnd prompt. But I can't run the tftp command from touter's cli, % Unrecognized command. Any suggestions?
Thanks
Mark
02-17-2009 07:43 PM
You may want to try a 'no ccm mgcp' 'ccm mgcp'.
-nick
02-17-2009 08:10 PM
Thanks Nick. The no ccm mgcp and ccm mgcp has resolved the problem.
Thanks again
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: