IP SLA OID

Unanswered Question

Hi,

My requirement is to check for one-way latency of my link. I have configured ip sla "icmp echo" option for that

Configuration

ip sla 200

icmp-echo 10.97.1.11 source-interface GigabitEthernet0/1

timeout 20

threshold 20

frequency 15

ip sla reaction-configuration 200 react rtt threshold-value 20 10 threshold-type

immediate action-type trapAndTrigger

ip sla schedule 200 life forever start-time now

snmp-server enable traps ipsla

snmp-server host 10.50.2.151 <string> ipsla

I am using HPOV as NNM. I need to view the trap I am receiving from the router. Can I know what oid values I need to have in my HPOV for IP sla.

Thanks and regards

SAT

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 02/17/2009 - 08:10

Yes, you must load this MIB into NNM. That will import all of the traps and OIDs so you can translate the varbinds from the IP SLA notification into human-readable object names.

If you have never loaded Cisco MIBs into NNM before, you should first read this document as there are prerequisite steps to follow:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800b4cee.shtml

Hi clarke,

Thanks for the response and the reference document. I was able to download the " CISCO-RTTMON-MIB" and tried to load in my HPOV. I am getting an error " [CISCO-RTTMON-MIB] - Line 6235: Error defining object: found 'nReactConnectionEnable' "

I am also attaching the snapshot of the error message.

Am I missing something or do I have to edit the file which I downloaded.

Thanks and Regards

SAT

Actions

This Discussion