JRM service issue

Unanswered Question
Feb 17th, 2009
User Badges:

I am using LMS 3.0.1 on windows 2003 service pack 2 with DFM ver 3.0.4 and facing the following problems:


1.Whenever we open RME, it shows JRM service is down. I tried to restart the JRM service many times but it stucks up at intialization stage every time( pls find the attached jrm log file for reference).


2. DCRServer and JRM service frequently goes down and comes up automatically, can you pls let me know is there any bug related to this problem and can we have any patch from your side to resolve the issue.


3. DFMCTMStartup service is not coming up, I tried it by issuing pexec DFMCTMStartup command, can you pls let me know what is the reason why different services frequently goes down and comes up by their own.


Pls let me know if you need any further information from my side and would be thankful to you if anyone could provide the permanent resolution of the instability of LMS services related issues.




Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 02/17/2009 - 07:54
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Please post the output of the DOS SET and pdshow commands.


According to this log, jrm is not coming up at all, so I don't see how it and DCRServer could be coming up and going down.


DFMCTMStartup may not be running in normal operation. This is nothing to worry about.

kamallohiaji Thu, 02/19/2009 - 03:06
User Badges:

Hi jclarke,


Pls find the output of pdshow and pdexec command below:


C:\Documents and Settings\Administrator>pdshow jrm


Process= jrm


State = Running normally


Pid = 11612


RC = 0


Signo = 0


Start = 2/19/2009 2:56:21 PM


Stop = Not applicable


Core = Not applicable


Info = Server started by admin request



C:\Documents and Settings\Administrator>pdexec jrm



pdexec jrm - no output.



JRM service is still showing down in RME, pls find the attached CTMJRMServer log file, if you could find something relevant there.



Joe Clarke Thu, 02/19/2009 - 14:18
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

I need to see the complete pdshow output as well as the output of the DOS SET command. IT would also be useful to see the jrm.log.

Actions

This Discussion