We noticed today that while the SIP200 OIR events are sent to the local logs (buffered), they are not sent to our syslog servers, as the rest of the systems messages.
The missed message was something like:
SLOT 1: Feb 17 13:53:29: %SPA_OIR-6-REMCARD: Card removed from Subslot 1, interfaces disabled
a check on the specific SIP has shown us:
router#sh hw-module slot 1 logging
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 37 messages logged, xml disabled,
Monitor logging: level debugging, 0 messages logged, xml disabled,
Buffer logging: level debugging, 37 messages logged, xml disabled,
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
The router syslog config is smth. like this:
logging facility local6
logging source-interface Loopback0
Am i missing something here? Is there a way to enable syslog for the SIP200?
Thanks in advance