cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
765
Views
0
Helpful
1
Replies

AP 1252G LAP to Autonomous

wasiimcisco
Level 1
Level 1

I am not able to downgrade the 1252G to Autonomous Access point. First I try with IOS image c1200-k9w7-tar.123-7.JA5.tar

I rename it to -tar.default and upload the IOS after the upgrade I am gettting this error and AP has stuck

File "flash:/c1200-k9w7-mx.123-7.JA5/c1200-k9w7-mx.123-7.JA5" uncompressed and installed, entry point: 0x3000

executing...

Please help me out who to solve this problem and which another IOS should i have to try.

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Wasim,

You are on the right track here :) You will need a newer IOS like 12.4(10b)JA

;

Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(7)JA5

System Requirements

You can install Cisco IOS Release 12.3(7)JA5 on all 350, 1100, 1130AG, 1200, 1230AG, and 1240AG access points.

http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b37ja5rn.html

Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA

System Requirements

You can install Cisco IOS Release 12.4(10b)JA on all 1130, 1240, 1250 series access points, 1300 series outdoor access point/bridges, and 1400 series bridges

http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_410b_JArn.html

Hope this helps!

Rob

View solution in original post

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Wasim,

You are on the right track here :) You will need a newer IOS like 12.4(10b)JA

;

Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(7)JA5

System Requirements

You can install Cisco IOS Release 12.3(7)JA5 on all 350, 1100, 1130AG, 1200, 1230AG, and 1240AG access points.

http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b37ja5rn.html

Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA

System Requirements

You can install Cisco IOS Release 12.4(10b)JA on all 1130, 1240, 1250 series access points, 1300 series outdoor access point/bridges, and 1400 series bridges

http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_410b_JArn.html

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: