setup RPS 2300 priority via CLI

Answered Question
Feb 17th, 2009

Hi,

What 3560/3750 CLI command will set priority of an RPS 2300 power system?

Best regards, Peter

I have this problem too.
0 votes
Correct Answer by owillins about 7 years 9 months ago

Use the power rps user EXEC command on the switch stack or on a standalone switch to configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300, connected to the switch stack or a standalone switch. power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active | standby}{priority priority}

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
owillins Tue, 02/24/2009 - 07:04

Use the power rps user EXEC command on the switch stack or on a standalone switch to configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300, connected to the switch stack or a standalone switch. power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active | standby}{priority priority}

Actions

This Discussion