LMS Upgrade.

Unanswered Question
Feb 17th, 2009
User Badges:

We're upgrading our Cisco Works LMS from 2.6 to 3.0. However, we also

own Operations Manager and Service Monitor which are both tied into our current LMS

install. They are both tied into the database on the LMS server. Are there any issues

with upgrading LMS given our setup with OM and SM? Any prerequisites for OM or SM before

we perform the in place upgrade to LMS 3.0?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Joe Clarke Tue, 02/17/2009 - 09:22
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

First, OM and SM cannot be installed on the same server as LMS. So I imagine you're doing DCR master/slave between the OM and LMS servers. This is fine. If you upgrade LMS to 3.0, you must make sure the LMS server is the DCR master. The OM server can still peer to this server.

aryanadonis Tue, 02/17/2009 - 17:25
User Badges:


Yes, it is correct. The LMS server is currently the DCR master. After the upgrade to 3.0,

do I need to do anything at all with OM and SM or is it seamless from the OM and SM


Joe Clarke Tue, 02/17/2009 - 21:37
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You should restart Damon Manager on the OM server. And as always, make sure you have a backup of both servers before you begin, just as a precaution.


This Discussion