I want to add 1 plus to the area code to my locally dialed numbers.
How can I the UC520 to realize it is a local call from the user prospective but add 1 plus the area code so the SIP trunk provider can process the call.
This is not currently possible via CCA. But the CLI I posted should be safe. Give that a try. If you run into any issues, please contact us. We'll be happy to help.
Edit the following rules using the CLI (make additions where appropriate):
voice translation-rule 1112
rule 1 /^91/ /+1/
rule 2 /^9011/ /+/
rule 4 /^9/ /+1/
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate calling 1111
translate called 1112
Make sure that your SIP dial peers (1000 range) have the profile applied, for example
dial-peer voice 1001 voip
corlist outgoing call-local
description ** Outgoing call to SIP trunk (Generic SIP Trunk Provider) **
translation-profile outgoing PSTN_Outgoing
The above feature is called a "voice translation rule" and uses an SED-like syntax for digit manipulation. More info on:
Hope this helps,
Technical Marketing Engineer
Cisco Systems, Inc.