Antenna Question

Answered Question
Feb 18th, 2009
User Badges:

Hello,


I recently purchased a AIR-ANT5195P-R antenna to use with a 1240AG AP to do some testing with. When I received the antenna, I noticed it only had one cable coming from it. Why is that and does that mean I should have ordered 2?


Thanks,

Nick

Correct Answer by GregL about 8 years 1 month ago

Nick if you are not going to use diversity which requires 2 antennas then you can connect your single antenna to the right antenna port. and Disable the left.


From 1242 Config guide.

For one antenna, attach the antenna on the right and set the antenna for right.


http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43rf.html#wp1037786


Hope this helps

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
GregL Wed, 02/18/2009 - 11:15
User Badges:

Nick if you are not going to use diversity which requires 2 antennas then you can connect your single antenna to the right antenna port. and Disable the left.


From 1242 Config guide.

For one antenna, attach the antenna on the right and set the antenna for right.


http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43rf.html#wp1037786


Hope this helps

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode