02-18-2009 12:22 PM
Trying to setup a site to site vpn beetween a ASA 5505 and a 5510. I can't get anything threw, there is now debug messages either. I must have done something wrong, I followed this document: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080950890.shtml but I cant get it to work. Anyone who can have a look at my configs, maybe I have forgoten anything.
Solved! Go to Solution.
02-18-2009 01:17 PM
OK, if you go ahead and add this command to both firewalls "management-access inside" and try from one side ping inside 10.21.32.10 still nothing going through?
02-18-2009 01:04 PM
I just have a question for you, the outside interface of both ASA have private addressing, is this a setup on a lab? or is it real stuff
02-18-2009 01:14 PM
Just changed them because I didn't want my public ip's online.
Both boxes answers when I ping the public ip from console so regulary traffic between is ok.
02-18-2009 01:17 PM
OK, if you go ahead and add this command to both firewalls "management-access inside" and try from one side ping inside 10.21.32.10 still nothing going through?
02-18-2009 02:04 PM
didn't work.
I will make a drawing of the network.
02-18-2009 02:35 PM
Now I got ping reply from 10.21.32.10, but not from any other hosts on that network. I pinged from a computer in the 10.20.0.0 network.
02-18-2009 02:21 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: