RME 4.2: Management Station to Device test

Answered Question
Feb 18th, 2009
User Badges:
  • Gold, 750 points or more

I have an ASA that fails SSH v1 or v2 in Management Station to Device tests, immediately. Yet, I can manually SSH (v2) on the server's CLI to the ASA just fine. It's not a timeout value issue. Is Management Station to Device test doing anything funky?



Correct Answer by Joe Clarke about 8 years 2 months ago

It is a timeout value issue. This is my bug CSCsx08790. The problem is the timeouts in the GUI are being evaluated as milliseconds instead of seconds. I wrote a patch (available from TAC), but the workaround is just to multiple your seconds by 1000.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Wed, 02/18/2009 - 13:27
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

It is a timeout value issue. This is my bug CSCsx08790. The problem is the timeouts in the GUI are being evaluated as milliseconds instead of seconds. I wrote a patch (available from TAC), but the workaround is just to multiple your seconds by 1000.

Actions

This Discussion