02-18-2009 12:54 PM - edited 03-11-2019 07:52 AM
Have a remote site that is changing ISPs, I need to change the outside interface IP Address / Subnet Mask and the ASAs default gateway, how can I change all three remotely at the same time?
02-18-2009 12:58 PM
Load the new config to the startup-config via tftp and reload the firewall.
02-18-2009 01:03 PM
Thank you, can you be a bit more verbose, when I do a show flash there is no startup-config.
Is it a text file, invisible or something else?
02-18-2009 01:09 PM
Sorry I don't think you can see the startup-config in the file system. But you can do the following command which will upload a file to the startup-config.
copy tftp: startup-config
Also, make sure you don't do a wr mem after the upload as this would write the running-config back to the startup-config...
I don't think the file has an extension, I would first tftp a copy of the running-config to your machine, then edit the file with notepad and tftp it back as the startup-config. Hope that answers your question.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: