02-18-2009 12:54 PM - edited 03-06-2019 04:06 AM
10 express 500 and 2 2960 are uplinked to a 3750 .
PC's getting dhcp address from all 2960's and 3750 itself .
but not with express 500 .
02-18-2009 02:06 PM
Can you provide more information about your network? How about the configs for the Express 500?
02-20-2009 03:39 AM
This is just a wild shot in the dark.
have you configured the 500 switches uplink port as uplinks ? ie the port you connect between the 500 and the 3750.
good luck
02-20-2009 10:39 AM
Have you checked the status and configuration of the interfaces. This is most likely a trunking issue.
You should ensure you CE500 ports connected to the 3750 are set to trunk ports.
You will also want to ensure that you have ip helper-address assigned to these vlans so that these ports can get a dhcp address.
HTH, Please rate if so
Regards,
Justin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide