Integrating CUCM with CUVC

Unanswered Question
Feb 18th, 2009


We have a CUCM and Cisco unified video conferencing setup seperately.

We have 7985 Phones registered with CUCM. Pl clarify me how to integrate this Video Phone with the setup of CUVC and take this phone in video conferencing.

CUCM version 7.0

CUVC 3545.



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
karthiksr Sun, 02/22/2009 - 22:21

Hi Bevilacqua

Can you provide some knowledge sharing on requirement.



Nick Halbert-Li... Thu, 02/18/2010 - 15:02

You need to register both the CUVC and CUCM to a gatekeeper (plenty of documentation around on how to configure a gatekeeper - it's pretty easy).

On the CUVC, enable the H323 protocol and enter the IP address of the gatekeeper.

On CUCM, add a new device -> gatekeeper and enter the details.

Then create a new H.225 trunk to the gatekeeper you just added.  All the trunk details are pretty straight forward.

Create an appropriate route pattern in CUCM to match the service prefix's configured in CUVC and send it out the gatekeeper trunk.

Note that this isn't a step-by-step configuration guide, just the basic layout of what you need to do.


This Discussion