Anchor Guest 3.2.171.6 Web Authentication page issue

Unanswered Question
Feb 19th, 2009
User Badges:

Hi folks,

I'm having issues with our Anchor controller here running 3.2.171.6. Using a chain certificate for our Web authentication re-direct Page to a WEB-server. sometimes the Guest Clients are not re-directed to the WEb authentication page. After I reboot the Anchor this resolves the issue. I need to use this code to support the ipsec vpn module. any ideas would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Stephen Rodriguez Thu, 02/19/2009 - 10:54
User Badges:
  • Purple, 4500 points or more

you need to try to find a non-chained certificate. I know that most CA do not use these anymore, but need to find one. WLC does not support chained-certificate until 5.2. It may work, but it is not supported.


HTH,

Steve

Scott Fella Fri, 02/20/2009 - 12:27
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

RapidSSL offers root CA certs which you can use and load onto the wlc to avoid the certificate error issue.

BeechLiam Wed, 02/25/2009 - 01:09
User Badges:

My mistake guys , this is in fact a root CA. Wondering if anyone can point me to a bug code that might explain this issue.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode