DID service with FXS/DID card CUCM

Unanswered Question
Feb 19th, 2009
User Badges:

I am running CUCM 6.1 with a 2811 MGCP gateway.

I recently ordered 4 DID trunks, but cannot find any config guided on how to do this.

Specific questions, on the CUCM gateway, do I configure as Loopstart, Groundstart or POTS?

Is it better to do this with H323? If so, andy config examples?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
paolo bevilacqua Thu, 02/19/2009 - 10:09
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You can do that with H.323 (or SIP) exclusively. Ask telco if these are immediate on wink-start. There is no LS/GS with analog DID.

hauchinango Thu, 02/19/2009 - 10:11
User Badges:

Thanks for the quick response. I do believe telco is wink start. Can you provide a small config example?


This Discussion