ansalaza Thu, 02/19/2009 - 12:53
User Badges:
  • Cisco Employee,

Configuring the Router to Use the Kerberos Protocol

http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfkerb.html#wp1001137


c3750-ipbasek9-tar.122-44.SE5.tar

Catalyst 3750 IP base cryptographic image and device manager files.

This image has the Kerberos, SSH1 , Layer 2+, and basic Layer 3 routing features.

This image also runs on the Cisco EtherSwitch service modules.


c2960-lanbasek9-tar.122-44.SE5.tar

Catalyst 2960 cryptographic image file and device manager files. This image has the Kerberos and SSH features.


http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/release/notes/OL14630.html#wp841480

halogensoftware Fri, 02/20/2009 - 12:54
User Badges:

Did install the suggested image on the 2960 (see below), but still do not have "kerberos" option under "conf t". What am I doing wrong?


Thanks a lot,

Evgueni


Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 26 WS-C2960-24TT-L 12.2(44)SE5 C2960-LANBASEK9-M



Switch(config)#?

....

ip Global IP configuration subcommands

ixi IXI Config command

key Key management

kron Kron interval Facility

lacp LACP configuration

li-view LI View


Actions

This Discussion