What is the order to choose Dial-Peer for outside call?

Unanswered Question
Feb 19th, 2009
User Badges:

I have 4 outside FXO lines.

And four dial-peer for oyside call.

I wonder how cisco choose free FXO line.




Is it possible to program it lowest-time-used?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Thu, 02/19/2009 - 10:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes. Under voice-port, put the lines in trunk-group. Under said trunkgroup, choose an hunt scheme. Reference trunkgroup instead of port under DP.

Jaime Valencia Thu, 02/19/2009 - 11:52
User Badges:
  • Cisco Employee,
  • Hall of Fame,


the other option would be to use the command

dial-peer hunt

to configure which algorithm to use, info is available on cco



if this helps, please rate

recep.sefer Thu, 02/19/2009 - 21:22
User Badges:

I have been test it,

Even I set hunt-scheme as lest use,

It choses next port as a least usage-count

I wat it to be least usage-time

Asuuming port usage as an example;

port-1 5-times (20-minutes)

port-2 2-times (30-minutes)

It choses port-2

My config is;

trunk group T-TRUNK

hunt-scheme least-used



dial-peer voice 444 pots

trunkgroup T-TRUNK

destination-pattern 9



voice-port 0/1/0

trunk-group T-TRUNK

voice-port 0/1/1

trunk-group T-TRUNK

voice-port 0/1/2

trunk-group T-TRUNK

voice-port 0/1/3

trunk-group T-TRUNK



This Discussion