02-19-2009 12:40 PM - edited 07-03-2021 05:12 PM
One of my customers gave me an old AIR-AP350 series access point.
When you power it on it gives 3 solid amber lights, then flashes 3 solid red lights, then 3 solid green lights and then all activity stops as far as the indicator lights go. I don't get any response at all through the ethernet port and I get nothing through the serial port.
Is there anything I can do with this or is it junk?
02-19-2009 01:14 PM
02-19-2009 06:53 PM
Yes, the problem is I can't find any physical reset button on the device, and I get nothing out of the console port. Nothing, no output from the device like it is booting up, so I can't start to boot and hit escape.
02-24-2009 04:01 PM
Try different baud rates on the console.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide