02-19-2009 03:46 PM - edited 03-11-2019 07:53 AM
Good night guys,
I configurated two ASA and the vpn didnt work, what is wrong?
Here is the vpn configuration and the results
crypto isakmp policy 10 hash md5
crypto isakmp policy 10 authentication pre-share
crypto isakmp enable outside
crypto map mymap 10 match address 100
access-list 100 permit ip 172.16.3.0 255.255.255.0 172.16.1.0 255.255.255.0
crypto ipsec transform-set myset esp-des esp-hd5-hmac
crypto map mymap 10 set peer 10.22.12.22
crypto map mymap 10 set transform-set myset
crypto map mymap interface outside
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 10.12.28.5
Type : user Role : initiator
Rekey : no State : MM_WAIT_MSG4
02-19-2009 04:50 PM
There are several required entries that seem to be missing from your configuration. Please reference the following document:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080950890.shtml
I would also strongly recommend against using DES encryption and md5 hashing.
02-19-2009 05:39 PM
OK Eddie, I ll try
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide