cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
548
Views
0
Helpful
8
Replies

HWIC-1ADSLI and HWIC-AP-AG-G not working in 2851

ivo_rynda
Level 1
Level 1

Any hint why this both cards are'nt working in my 2851 with C2800NM-ADVENTERPRISEK9-M 12.4(23)

boot messages for both slots are

*Feb 19 11:42:34.435: %GT96K_FEWAN-1-UNKNOWN_WIC: slot 0, wic card has an unknow

n id 4C9

*Feb 19 11:42:34.987: %GT96K_FEWAN-1-UNKNOWN_WIC: slot 0, wic card has an unknow

n id 491

although they should both be supported.

Any hint?

Ivo

3 Accepted Solutions

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

You need a T version of IOS to support these cards. You currently have a mainline version of IOS.

View solution in original post

No, it is not. Please read about 12.4T.

View solution in original post

Hi Ivo,

From you post it looks as if you are running 12.4.23 IOS version.

these modules are supported in the T train. I guess the min required for adsl card is 12.4.6t

Suggest you upgrade the IOS to the T train as suggested by Paolo.

-> Sushil

View solution in original post

8 Replies 8

paolo bevilacqua
Hall of Fame
Hall of Fame

You need a T version of IOS to support these cards. You currently have a mainline version of IOS.

to what version?

As I understand it's already new latest version.

Ivo

No, it is not. Please read about 12.4T.

Tnx will try it out

Ivo

Hi Ivo,

From you post it looks as if you are running 12.4.23 IOS version.

these modules are supported in the T train. I guess the min required for adsl card is 12.4.6t

Suggest you upgrade the IOS to the T train as suggested by Paolo.

-> Sushil

Hi Paolo and Sushil

using 12.4(22)T helped

now I can start configuring them ;-)

Tnx

Ivo

Sure. Thanks for the nice rating and good luck!

That's great news ivo.Good Luck.

-> Sushil

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: