02-20-2009 07:21 AM - edited 03-15-2019 04:21 PM
Hi,
Has anyone got any good pdf for configuring Nokia phones to work in dual mode with wireless and call manager setup.
Thanks,
Derek
02-20-2009 10:57 AM
Hi,
You could check pdfs from Nokia for Business site: http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php
-Pasi-
02-20-2009 08:48 PM
Is is possible to integrate with CallManager 4.x release?
02-21-2009 01:10 AM
Yes, with Nokia's Call Connect software.
-Pasi-
02-21-2009 03:39 AM
can we use it with cme 4.2...can my nokia E71 register with my cme router...plz reply...
02-21-2009 04:55 AM
Yes you can.
Nokia Call Connect software supports also CME and UC500.
-Pasi-
02-21-2009 04:59 AM
can you plz send the procedure how i can implement it...i will be very thankful to you...
02-22-2009 09:51 AM
I have installed the CallConnect Software from Nokia website. After install, although the Nokia device type appears in the "Add Phone" menu, but I could not find device load in TFTP folder?
Any suggestions
02-22-2009 11:18 PM
Hi,
Have you tried to register Nokia device to CUCM?
Is there any specific reason you want to see TFTP load?
-Pasi-
02-23-2009 02:41 AM
03-05-2009 01:47 AM
Hi,
I have E71 and installed Nokia ICC Cisco 60 day trial version on it.
I installed cmterm-nokia_s60_001-sccp.cop.sgn on our CUCM6.0.
I configured Acces Point, SCCP profile, Internet phone.. and all of that on the phone by Nokia Eseries Deployment Guide v.1.1.1
Problem is that i registerd phone on CUCM, he got an address, but I can't see the line on phone. Under Nokia CC Cisco there is (no profile active).
License error, or misconfiguration? Thanks in advanced!
03-05-2009 09:49 PM
Marijatopic,
Did you restart the phone after application installation. Also make sure to switch the phone to use the wireless (always), not the packet network.
Best of luck,
Khalid
03-05-2009 11:11 PM
Hi syed_khalid_khursheed,
I did, i reinstall the application also.
I also force connection Connecting "SCCP profile" via "My Acces Point".
Connection to CUCM is made, he is Registered with CUCM-BE, but he does not download its profile.
03-09-2009 04:11 AM
Hi,
Have you solved this issue already?
If not you could try to restart the CUCM
-pasi-
03-09-2009 04:17 AM
Hi pasimahone ,
i didn resolve this,
it's not lab environment,so i can't just restart it, maybe to restart some service.
But i got phone to register on CUCM- problem is that phone wont download profile from it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: