02-20-2009 09:42 AM
Hi All,
We are trying to find the reason and solution for the below problem. We are tring to perform the below command and get the below message.
router#show interfaces gigabitEthernet 5/1 transceiver
Diagnostic Monitoring is not implemented.
The module on which the above gig interface is WS-X6408A-GBIC and the IOS version running on this router is s72033-advipservicesk9_wan-mz.122-18.SXF11.bin. The sup on this router is SUP-720-3BXL.
Any help to understand why it is giving that message and the solution to overcome the same would be really appreciated.
Regards
Anantha Subramanian Natarajan
WS-X6408A-GBIC --Module 5
s72033-advipservicesk9_wan-mz.122-18.SXF11.bin
SUP-720-3BXL
02-20-2009 11:26 AM
Which GBIC optical modules are you installing into the WS-X6408A-GBIC? The following document outlines the DOM support by hdwe and software.
Cisco Digital Optical Monitoring Compatibility Matrix
02-20-2009 04:37 PM
Hi baileyshbr,
Thank you very much and I have to check the GBIC's .
Regards
Anantha Subramanian Natarajan
04-27-2012 03:15 AM
s-01-pnh-asr#sh interfaces gigabitEthernet 0/25 transceiver detail
Diagnostic Monitoring is not implemented.
Can't see anything.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: