MeetingPlace call failure (busy tone)

Unanswered Question
Feb 21st, 2009

Hi,

Recently I Have installed Cisco Unified MeetingPlace 7.0.1.4 (on an IBM 3650 server) with CCM 7.I Have done the integration with CCM via Sip Trunk Profile and Sip Trunk.

I have configured the SIP from the MP side following the documentation.

But when i call the meetingPlace number (i have configured a route pattern to MP in ccm which poins to the Sip trunk) I hear busy tone!

I cheked some debug on MP and found that the call reach MP, then it's disconnected. SO i suppose that the problem is from the MP side but i don't know what is exactly.

I have followed the troubleshooting Guide and found that when i go to the media Server Administration, i don't find any MCU! Is this normal. Following the troubleshooting Guide, i have to find an mcu and it's status like this :

•Status-Online

•Connection-Connected

Can any networker help me please?

Regards.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
haouaswajih Sun, 02/22/2009 - 23:58

Hi, Thx for your help.

Can you please tell me more? Do you mean that I have to add a hardware MCU ? or ..?

MeetingPlace Express work without MCU. IS it different from MeetingPlace?

Thx

Actions

This Discussion