cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2798
Views
0
Helpful
1
Replies

Lost Contact Messge using CUE Gui

patrick.hurley
Level 3
Level 3

I tried everything on this link and nothing works.   When I ran through the wizard I used cisco for username and cisco for password and when I check on CUE the admin username was cisco and its password was cisco.   I researched a bunch of other posts and saw that this is seen a number of times.

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml#tshoot

untitled.bmp

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml#tshoot

1 Reply 1

phershaw
Level 1
Level 1

Patrick,

Make sure you put the IP address of the CME router (or UC520) in the Hostname field.

The username and password are the webadmin username and password configured under telephony-services on the CME.

Phil