cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
381
Views
0
Helpful
4
Replies

2Ethernet links - Failover-static routing

gajanangavli
Level 1
Level 1

I have 2 ethernet links,(differnet IP schecme- Diff service provider) primary and secondry.static routing is configured.how can acheive the failover automatically ?

4 Replies 4

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Gajanan,

reliable static routing with object tracking can help in your scenario:

you can trace ip reachability of an ip address in provider1 for example.

When the test fails the backup route is used

see

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html')">http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html

Hope to help

Giuseppe

Hi Giuseppe,

Thanks for your help.

I have some configuration as below.

ip flow-cache timeout active 1

ip sla monitor 1

type echo protocol ipIcmpEcho1.1.1.1

timeout 1000

threshold 2

frequency 3

ip sla monitor schedule 1 life forever start-time now

I have configured this one but not working , 1.1.1.1 is primary link ip , need any more configuration.

Gajanan

You have not included in the post the configuration of the static routes. So we can not tell whether you have actually included the track option in the configuration of the primary static route. The track option in the static route detects when the address you are tracking is not available and at that point the static route is removed from the routing table. So have you included the track option in the static route?

HTH

Rick

HTH

Rick
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco