FWSM SNMPv2c

Unanswered Question
Feb 23rd, 2009
User Badges:

Alright,


Here I go again...We had configured one of our FWSM's to allow snmpv2c / ssh to archive the configs. All went well...finally got it working, thanks to JClarke....so, I'm in doing the same thing, exact procedure with a different FWSM...From CW, SSH credentials test good. I can SSH to the interface on the firewall from the CW server all appears good.


However, when I attempt to SNMP walk, or test the community string from within CW, it fails with "Wrong Credentials". this seems like a trivial problem. But have verified the credentials and have even changed them (longer/more complex) and still, same error...verified ACL to the interface on the FWSM (allows IP any/any) any thoughts on this particular "wrong credentials" prob...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Mon, 02/23/2009 - 09:55
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The same suggestions I offered before still apply. You must allow the LMS server to poll the FWSM:


snmp-server host Vlan10 10.1.1.1 poll community public


Beyond that, use a sniffer to make sure the SNMP packets are making it to the FWSM, and that the community string is, in fact, correct.

Actions

This Discussion