Radius Server configuration on Windows 2008 Server

mrahman0302 · ‎02-23-2009

Hi,

I have a customer who has 14 Cisco 1130 Access point on the network. The AP's were authenticating via Windows 2003 Radius server. After there Windows server crashed they have installed new server with Windows 2008 server and tried to setup Radius on that server. Is there any document is there that will show step by step installation on Windows 2008 server and on Cisco 1130 Access point? Any help will that will be grat.

Thanks.

Scott Fella · ‎02-23-2009

Here is a doc for Windows 2003 Server, they can follow.... they would have to make sure they change the shared secret unless they remember the shared secret that was previously configured on the ap.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml')">http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml')">http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml')">http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml

Here is another one:

http://technet.microsoft.com/en-us/library/dd183706.aspx')">http://technet.microsoft.com/en-us/library/dd183706.aspx

http://technet.microsoft.com/en-us/library/cc731853.aspx

-Scott
*** Please rate helpful posts ***