ACS 4.2 no Microsoft Network Access Protection Setting, NAC Framework

Unanswered Question
Feb 23rd, 2009
User Badges:

I'd like to use ACS 4.2 working with win2008 HCAP, but on ACS does not show "Microsoft Network Access Protection" in the "Interface Configuration> Advanced Options>...",

there should be any protocol or any where to enable first, please advise.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
loebennt Tue, 02/24/2009 - 02:48
User Badges:

Hi aew!


I'm having the same problem. Unable to find a known bug to this. I know your post is only one day old, but did you find a solution to this already? I'll post if I find anything interesting.


Thanks,

Bent Ole

HELPDESK THAILAND Tue, 02/24/2009 - 02:56
User Badges:

Hi loebennt,

I've been searching how to enable "Microsoft Network Access Protection" for a whole week, still can not find, and I'm waiting answer from a friend also.

If I have found, I'll post for you...


Hope someone help us...

Daniel Laden Wed, 02/25/2009 - 00:13
User Badges:
  • Cisco Employee,

Obtaining NAC/NAP


This initial NAC/NAP release is a limited offering from Cisco and Microsoft.


If your organization has an immediate need to evaluate or deploy the NAC/NAP solution in your environment, contact your Cisco sales representative.


Release Notes for NAC/NAP Interoperability Architecture 1.0

http://www.cisco.com/en/US/docs/security/nac-nap/1.0/release/notes/NACNAPRN.html#wp1161060


HELPDESK THAILAND Thu, 02/26/2009 - 02:35
User Badges:

Hi Daladen,


When you finished install ACS 4.2 and you go to...

Interface configuration> Advanced Option>

can you see "Microsoft Network Access Protection Settings"

I'd to know, why my ACS4.2 does not show.


Best regards.


lmilher_2 Fri, 06/19/2009 - 12:49
User Badges:

Dear Friends, i have same problem and a customer asking me about that.

NAC/NAP is not available today ? documentation has information about new ACS versions ??

thanks a lot.

Leo.

Actions

This Discussion