ACS 4.2 no Microsoft Network Access Protection Setting, NAC Framework

HELPDESK THAILAND · ‎02-23-2009

I'd like to use ACS 4.2 working with win2008 HCAP, but on ACS does not show "Microsoft Network Access Protection" in the "Interface Configuration> Advanced Options>...",

there should be any protocol or any where to enable first, please advise.

loebennt · ‎02-24-2009

Hi aew!

I'm having the same problem. Unable to find a known bug to this. I know your post is only one day old, but did you find a solution to this already? I'll post if I find anything interesting.

Thanks,

Bent Ole

HELPDESK THAILAND · ‎02-24-2009

Hi loebennt,

I've been searching how to enable "Microsoft Network Access Protection" for a whole week, still can not find, and I'm waiting answer from a friend also.

If I have found, I'll post for you...

Hope someone help us...

Daniel Laden · ‎02-25-2009

Obtaining NAC/NAP

This initial NAC/NAP release is a limited offering from Cisco and Microsoft.

If your organization has an immediate need to evaluate or deploy the NAC/NAP solution in your environment, contact your Cisco sales representative.

Release Notes for NAC/NAP Interoperability Architecture 1.0

http://www.cisco.com/en/US/docs/security/nac-nap/1.0/release/notes/NACNAPRN.html#wp1161060

HELPDESK THAILAND · ‎02-26-2009

Hi Daladen,

When you finished install ACS 4.2 and you go to...

Interface configuration> Advanced Option>

can you see "Microsoft Network Access Protection Settings"

I'd to know, why my ACS4.2 does not show.

Best regards.

lmilher_2 · ‎06-19-2009

Dear Friends, i have same problem and a customer asking me about that.

NAC/NAP is not available today ? documentation has information about new ACS versions ??

thanks a lot.

Leo.