How to config QoS in ASA5550

Unanswered Question
Feb 24th, 2009

Dear all,

Video & voice is not clear in telepresence device, using ASA between inside & outside. how to configure QoS for this scenario.

thanks & regards,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Syed Iftekhar Ahmed Tue, 02/24/2009 - 01:34

ASA's uses QOS only in outbond direction.

It utilizes a single LLQ and matches

DSCP via class maps.

As far as configurations goes, you need to enable LLQ on an interface.Use class map to select traffic that you want to use in Queue and finally push traffic to the queue using policy map.

Following link will give you an example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

HTH

Syed Iftekhar Ahmed

Actions

This Discussion