ASA 5510 - Version 8.0.4 - Add 25 licenses for VPN

Unanswered Question
Feb 24th, 2009

Hello,

I need to add 25 VPN licenses on ASA5510 configured in Active/Standby.We 've made an upgrade from 7.3 to 8.0.4 for having the ASDM interface.

I have only one authorization key for 2 equipements. When teh authorization key has been entered on the active it's ok, but when it's entered on the Standby , the ASA5510 is crashing on the screen, no log has been registered on system log.

My question is ?

Either i have not understood the process to add licenses (cf http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/license.html#wp1128277) or a another authorization key need to be generated ?

Thanks Richard

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
drolemc Mon, 03/02/2009 - 09:16

For a failover pair, you need separate activation keys for each unit. Make sure the licenses included in the keys are the same for both units.

Actions

This Discussion