cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
486
Views
0
Helpful
2
Replies

Cat3560 - QoS output

agtmcgarry
Level 1
Level 1

Hi,

Can anyone explain then following output.

I have searched the command reference and configuration guide but they do not explain the five coloums showing packets. Are these tansmits, drops, queues.

Thanks

Anthony

sh mls qos interface f0/13 statistics

FastEthernet0/13

dscp: incoming

-------------------------------

0 - 4 : 43485 0 0 0 0

5 - 9 : 0 0 0 0 0

10 - 14 : 0 0 0 0 0

15 - 19 : 0 0 0 0 0

20 - 24 : 0 0 0 0 0

25 - 29 : 0 3085236 0 0 0

30 - 34 : 0 0 0 0 0

35 - 39 : 0 0 0 0 0

40 - 44 : 0 0 0 0 0

45 - 49 : 0 247128241 0 409093 0

50 - 54 : 0 0 0 0 0

55 - 59 : 0 0 0 0 0

60 - 64 : 0 0 0 0

dscp: outgoing

-------------------------------

0 - 4 : 950962 0 0 0 0

5 - 9 : 0 0 0 46 0

10 - 14 : 0 0 0 0 0

15 - 19 : 0 0 0 0 0

20 - 24 : 0 0 0 0 4204

25 - 29 : 0 8 0 0 0

30 - 34 : 0 0 0 0 0

35 - 39 : 0 0 0 0 0

40 - 44 : 0 0 0 0 0

45 - 49 : 0 186178077 0 4382751 0

50 - 54 : 0 0 0 0 0

55 - 59 : 0 0 0 0 0

60 - 64 : 0 0 0 0

cos: incoming

-------------------------------

0 - 4 : 250697280 0 0 0 0

5 - 7 : 0 0 0

cos: outgoing

-------------------------------

0 - 4 : 968289 46 0 4212 0

5 - 7 : 186178077 3998563 384188

Policer: Inprofile: 0 OutofProfile: 0

1 Accepted Solution

Accepted Solutions

simontibbitts
Level 1
Level 1

Hello.

The numbers indicate the incoming or outgoing marked packets. So for example, the row below shows how many packets have been seen for DSCP values 0, 1, 2, 3 and 4. In the case below, 43485 packets have been seen incoming with a DSCP value of 0

0 - 4 : 43485 0 0 0 0

In the example below 186178077 packets have been see inbound with the DSCP of 46 marked.

45 - 49 : 0 186178077 0 4382751 0

Simon

View solution in original post

2 Replies 2

simontibbitts
Level 1
Level 1

Hello.

The numbers indicate the incoming or outgoing marked packets. So for example, the row below shows how many packets have been seen for DSCP values 0, 1, 2, 3 and 4. In the case below, 43485 packets have been seen incoming with a DSCP value of 0

0 - 4 : 43485 0 0 0 0

In the example below 186178077 packets have been see inbound with the DSCP of 46 marked.

45 - 49 : 0 186178077 0 4382751 0

Simon

Hi Simon

Thanks for the reply.

Yes now I can see it, the 0-4 represent the coloums.

0 1 2 3 4

4382751 packets have been marked with dscp 48 etc..

Anthony

Review Cisco Networking products for a $25 gift card