×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

configuration QoS in CSS 11500 series

Unanswered Question
Feb 24th, 2009
User Badges:
  • Bronze, 100 points or more

I'd like know if is possible configure the QoS in CSS11500 series, and what requirements has fulfill to it to do that?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smalkeric Mon, 03/02/2009 - 14:48
User Badges:
  • Silver, 250 points or more

The CSS does not have any QoS feature on it, since it is meant just to balance the traffic. Anyway there are some other setting you my like interesting.


To limit the usage of a service, you can configure max connections on a content rule, so if that value is surpassed, the service will stop receiving new connections and will work with the existing connections. To configure this use the following:


CSS11503A(config-service[https])# max connections (Range: 6-65534) .


Pretty much that command is the only way to control traffic being sent to a specific Service.


Another choice is to create an ACL to redirect the traffic form an specific user or network to a determinate content rule or service, and this way avoid the CSS to process the traffic from that user/network as new saving some resources.



Actions

This Discussion