Unified comms manager QOS markings

Unanswered Question
Feb 24th, 2009
User Badges:

I see from vdocs that Communications manager uses many varied ports for communicating with endpoints,otherservers and gateways etc.

Does it mark all these packets as CS3, so All i need to do is classify cs3 as opposed to having to try and cover all the port numbers?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ivillegas Mon, 03/02/2009 - 07:19
User Badges:
  • Silver, 250 points or more

In order to apply QoS mechanisms for a Cisco IPT solution you will need to identify traffic that handle the following markings:

Voice Streams = DSCP EF or 46

IP precedence 5

Call signaling streams = DSCP AF31 or 26 / CS3 or 24

IP precedence 3

The traffic that uses the ports is marked with DSCP AF31 or 26 / CS3 or 24 / IP precedence 3.

Quality of Service on Cisco CallManager:



This Discussion