02-24-2009 10:07 AM - edited 03-04-2019 03:42 AM
Craziest thing. I have a router at a remote office and I can not telnet to either active port. I can ping it, it is passing traffic, I can telnet to devices on the other side of it. Here is the config, I would appreciate any ideas or trouble shooting suggestions.
02-24-2009 10:46 AM
Were you ever able to telnet into it?
Has the router rebooted recently?
How recent are the configurations you provided?
02-24-2009 11:12 AM
the config is a few weeks old. I was able to telnet it until a couple of weeks ago. the router was re-started this weekend.
02-24-2009 11:21 AM
maybe do a port scan so see if port 22 is open on it.
02-24-2009 11:25 AM
Maybe the following was not saved and the router lost when it was rebooted:
line vty 0 4
password xxxxxxxx
login
03-11-2009 06:51 AM
Well, after working with TAC we fixed the problem. I just don't understand why it fixed it. We turned off "ip classless". When I entered the command "no ip classless" Telnet then began working. Really strange but it fixed the problem.
03-11-2009 01:17 PM
Glad to hear that it's working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide