No ring back/progress indicator on FXS ports

Unanswered Question
Feb 24th, 2009
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony


Guys,


I am doing an install and I have fxs ports on the gateways for fax machines. However when I dial the fax number, I do not get a ring back. The fax rings but no ring back on the phone I am dialling from. This is affecting all the fxs ports.


any ideas.


sample config below


dial-peer voice 4780 pots

destination-pattern 4780

progress_ind setup enable 3

progress_ind alert enable 8

progress_ind progress enable 8

direct-inward-dial

port 2/0/0

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ayodeji Okanlawon Tue, 02/24/2009 - 15:45
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Not to worry,after configuring "voice call send-alert" it resolved the problem


Thanks all!

Actions

This Discussion