How to setup Xcode adn Conf on CME PVDM based

Unanswered Question
Feb 24th, 2009
User Badges:

I have NM-HDV with PVDM (not PVDM2)on my CME router. I don't know how to setup Xcoding and Conference for CME with PVDM.

Only PVDM-2 configuration guide for CME can be found.

Pls give me some advice?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
david-lima Wed, 02/25/2009 - 06:20
User Badges:
  • Bronze, 100 points or more

Hi, you can check this.

Configuring DSP Farms for NM-HDVs

SUMMARY STEPS

1. enable

2. configure terminal

3. voice-card slot

4. dsp services dspfarm

5. exit

6. sccp local interface-type interface-number

7. sccp ccm ip-address priority priority-number

8. sccp

9. dspfarm transcoder maximum sessions number

10. dspfarm

Check this guide.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmetrnsc.html#wp1043651

Hope this help

David

zhangjianping Thu, 02/26/2009 - 17:44
User Badges:

Thanks David.


I don't know what's the relationship between the CLI you enclosed and the belowing CLI under telephone-service:


sdspfarm units number

sdspfarm transcode sessions number

sdspfarm tag number device-number


Actions

This Discussion