02-24-2009 10:26 PM - edited 03-15-2019 04:26 PM
I have NM-HDV with PVDM (not PVDM2)on my CME router. I don't know how to setup Xcoding and Conference for CME with PVDM.
Only PVDM-2 configuration guide for CME can be found.
Pls give me some advice?
02-25-2009 06:20 AM
Hi, you can check this.
Configuring DSP Farms for NM-HDVs
SUMMARY STEPS
1. enable
2. configure terminal
3. voice-card slot
4. dsp services dspfarm
5. exit
6. sccp local interface-type interface-number
7. sccp ccm ip-address priority priority-number
8. sccp
9. dspfarm transcoder maximum sessions number
10. dspfarm
Check this guide.
Hope this help
David
02-26-2009 05:44 PM
Thanks David.
I don't know what's the relationship between the CLI you enclosed and the belowing CLI under telephone-service:
sdspfarm units number
sdspfarm transcode sessions number
sdspfarm tag number device-number
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide