02-25-2009 02:29 AM - edited 03-06-2019 04:13 AM
Hi Pro
we rae facing an issue in which, we have not connected anything no process is running..still we are getting CPU utilization to 30 to 40 %.
Existing IOS:-cat4500-ipbasek9-mz.122-50.SG1.bin
Regards
Vaibhav
Solved! Go to Solution.
02-25-2009 04:50 AM
In switches the cpu has little to do with the actual moving of packets which are done by asics , that level is a normal level for an unloaded switch . Read this doc which will glaze your eyes over for explanation.
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml
02-25-2009 04:50 AM
In switches the cpu has little to do with the actual moving of packets which are done by asics , that level is a normal level for an unloaded switch . Read this doc which will glaze your eyes over for explanation.
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide