Inventory Failed for select devices: RICS0001 Internal Error

Answered Question

LMS: 2.6

CMS 3.0.6

DFM 2.0.12

RME 4.0.6

CV 6.1.5

5 - 3550 with IOS 12.2(25)SEE2 or newer

1 - stack WS-C3750G-12S 12.2(25)SEE2

1 - stack WS-C3750G-48TS 12.2(40)SE

Attached is ic_server.log

Attachment: 
I have this problem too.
0 votes
Correct Answer by Joe Clarke about 7 years 9 months ago

You will have to talk to entitlement about that. If your Service Request makes it to a TAC engineer, you should be able to get the patch.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Wed, 02/25/2009 - 11:00

You need to increase the SNMP timeout for 10.49.1.62, 10.49.1.66, and 10.51.17.254 under RME > Devices > Device Management > RME Devices > Edit Device Attributes. Start with 10 seconds, and go up if needed.

It looks like 10.49.1.95, 10.49.1.103, 10.49.1.84, 10.49.1.200, 10.49.1.60, 10.49.1.111, and 10.49.1.60 are affected by my bug CSCsm97530. A patch is available by contacting the TAC.

It looks like 10.49.1.102 and 10.49.1.120 are unreachable via SNMP from the RME server.

It looks like 10.51.14.246 might be a 2950 or 3550 running less than 12.1(19)EA1 code. This switch will need to be upgraded before inventory collection will work.

Correct Answer
Joe Clarke Wed, 02/25/2009 - 12:18

You will have to talk to entitlement about that. If your Service Request makes it to a TAC engineer, you should be able to get the patch.

Actions

This Discussion