Cisco Aironet 1300 QoS

Unanswered Question
Feb 25th, 2009
User Badges:

Hello, I have 2 Cisco Aironet 1300 Bridges which provide data and voice communication between 2 buildings. Up until recently QoS has not been needed, but lately there appears to be congestion due to reports of poor voice quality. Building A houses a V3000 NBX Telephone system, Building B houses approximately 30 remote IP phones. Building A and Building B are approximately 100 yards apart. No VLAN's. Due to myself being an extreme noob to Cisco bridges, I was hoping some of you may have had experience in setting this up and hopefully provide some tips. I need to prioritize traffic on UDP ports 2093-2096 and TCP port 1040. Thank you in advance for any suggestions. My current running config is below:

-----------------------------------------------------------------

Using 1283 out of 32768 bytes

!

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname LHS-WeightRoom-WCV

!

!

ip subnet-zero

!

!

aaa new-model

!

!

aaa authentication login default local

aaa authorization exec default local

aaa session-id common

!

dot11 ssid wcv

authentication open

guest-mode

!

dot11 ssid wcvcisco

authentication open

infrastructure-ssid optional

!

!

!

username root privilege 15 password 7 0247335A05320A2244

username Cisco privilege 15 password 7 074E164D403D1C061F

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

ssid wcv

!

ssid wcvcisco

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0

54.0

station-role root bridge

bridge-group 1

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 80 in

!

interface BVI1

ip address 10.141.8.6 255.255.254.0

no ip route-cache

!

ip default-gateway 10.141.8.5

ip http server

ip http authentication aaa

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

!

!

control-plane

!

bridge 1 route ip

!

!

!

line con 0

line vty 0 4

!

end

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion